Welcome!

General Discussion & Welcome Thread
RobC
Posts: 1
Joined: Thu Oct 24, 2019 6:02 pm

Re: Welcome!

Post by RobC » Thu Oct 24, 2019 7:03 pm

vanpeebles wrote:
Thu Oct 24, 2019 1:30 pm
I hope the 256 is a bit smaller! The TC-01 will be my new PC monitor stand when it arrives! :ugeek:
The 256 is much smaller.

However, I quite like the size of the TC01. As the drives are built-in (so no drive plinth), I like the fact that it doesn't need a monitor stand.

vanpeebles
Posts: 263
Joined: Wed Oct 23, 2019 8:43 pm

Re: Welcome!

Post by vanpeebles » Fri Oct 25, 2019 10:11 am

If anyone is in contact with other Tattie users, please spread the word! I reckon there will be quite a few people flying under the radar!

User avatar
MikeDHalliday
Posts: 220
Joined: Fri Oct 25, 2019 9:52 am
Location: Crewe
Contact:

Re: Welcome!

Post by MikeDHalliday » Fri Oct 25, 2019 1:52 pm

@vanpeebles I have been compiling a list that has been in the works for about 12 months of all the Einsteins I have seen or heard about across the web (eBay, Facebook, Shpock, Insta etc). I have about 100 machines on it at the moment .. That's how many there are left in the world??

Seriously though, I recon they only every shipped 40,000 machines as I can find no evidence of any machine with a S/N of over 6034855.

Unless anyone can point me in the direction of machines with serial numbers > 40,000 then 40,000 is a reasonable assumption.

Up until January this year, I had been away from the Einstein for about 30 years and really regret giving mine away all those years ago.

I started doing some Einstein Videos on my YouTube Channel because there were not many available, and since doing them a whole load more have appeared! - I guess people are finally appreciating this great machine.

Looking forward to seeing what mods others have on their machines, as I have a few in/on mine :)

Mike.
Ex owner of a real TC01 with Gotek boot drive and second drive, Joysticks, DAC hardware (Built but untested) and loads of manuals, books and mags. Living the emulation life now!

vanpeebles
Posts: 263
Joined: Wed Oct 23, 2019 8:43 pm

Re: Welcome!

Post by vanpeebles » Fri Oct 25, 2019 2:28 pm

Fingers crossed we can round some of them up :)

jltursan
Posts: 41
Joined: Fri Oct 25, 2019 6:09 pm

Re: Welcome!

Post by jltursan » Fri Oct 25, 2019 8:56 pm

Glad to be here!, Penrod has pointed me out about this new forum and I've just joined!

It has been a long time since the Yahoo Groups where popular and now when they come to an end, this forum arrives in the right time to fill this little niche :)

vanpeebles
Posts: 263
Joined: Wed Oct 23, 2019 8:43 pm

Re: Welcome!

Post by vanpeebles » Fri Oct 25, 2019 9:01 pm

A warm welcome! :)

vanpeebles
Posts: 263
Joined: Wed Oct 23, 2019 8:43 pm

Re: Welcome!

Post by vanpeebles » Sat Oct 26, 2019 3:47 pm

Please pass the message on too! :)

Greenoneten
Posts: 1
Joined: Mon Nov 04, 2019 10:39 pm

Re: Welcome!

Post by Greenoneten » Wed Nov 06, 2019 1:43 pm

Hi,
Thanks for the add.
Tatung owner and user.

vanpeebles
Posts: 263
Joined: Wed Oct 23, 2019 8:43 pm

Re: Welcome!

Post by vanpeebles » Wed Nov 06, 2019 1:48 pm

Greenoneten wrote:
Wed Nov 06, 2019 1:43 pm
Hi,
Thanks for the add.
Tatung owner and user.
A warm welcome to the forum, please pass the message on too! :)

andy_rea
Posts: 3
Joined: Sat Nov 02, 2019 4:46 pm

Re: Welcome!

Post by andy_rea » Thu Nov 07, 2019 6:53 am

Cool, i'll come join this little corner. i acquired a TC-01 complete with colour monitor all in working condition except for a missing GRAPH key cap, key switch still works. Love this little ( Ahem ) machine, happy to find it was a Z80 at its heart since as i'm familiar with it. I'm gonna enjoy this machine.

Regards Andy

Post Reply