The above link works with my 5.25" floppy drive (TEAC FD55FV-30-U) and is able to read a few 700KB discs and show the file index. Some discs show no files at all, even though there is writing on the disc labelsarcadesy wrote: ↑Mon Jan 30, 2023 11:54 amviewtopic.php?f=3&t=83 << interesting thread about getting 800k from a Gotek dsk image
![Sad :(](./images/smilies/icon_e_sad.gif)
Drive 0 set to single sided 40 track
Drive 1 set to double sided 80 track
Drive 2 and 3 set to same as Drive 0 (I dont have anything connected so just configured as standard)
Not sure if my drive is busted or not, as there is a lot of squeaking and whirring going onwhen reading discs. It is very old and I cannot remember where I aquired it from.
When trying to run a program off the floppy, the heads just move back and forth and I get a Bad Data 1: or No Sector 1: error message.
What external 5.25" drives are other people using (Make and model with jumper settings)?
I have 6 boxes of 5.23" discs that I need to test and check, but that project has hit a brick wall
![Sad :(](./images/smilies/icon_e_sad.gif)
Maybe the drive (In it's current configuration) will work with Grease Weazle and allow me to image the discs and use them in Mame or on my Gotek?
Thanks
Mike.