Screen output problem

Tatung Hardware talk TC01 & 256.
Post Reply
Paulwilco
Posts: 2
Joined: Thu Mar 28, 2024 10:02 pm

Screen output problem

Post by Paulwilco » Sat Mar 30, 2024 10:42 am

Hi everyone,

I have recently acquired an Einstein TC-01 and im getting it ready to display in a Museum i volunteer at. It all seems to be working except the picture is falling off the left hand side of the screen (the R and E of the ready on the MOS prompt cant be seen). I have tested it with several CRT televisions using a scart cable (with the extra connector to provide power). The jumpers on the board appear to be set correctly.

Unfortunately i've reached the end of my knowledge! Any advice would be gratefully received.

Thanks,

Paul.
Top
Lardo Boffin
Posts: 296
Joined: Thu Oct 24, 2019 11:47 am

Re: Screen output problem

Post by Lardo Boffin » Sat Mar 30, 2024 4:12 pm

Have you tried RF? The picture on mine was not too bad at all with RF.
TC-01 + einSDein + TM-01 + TK-02 + gotek
Top
Paulwilco
Posts: 2
Joined: Thu Mar 28, 2024 10:02 pm

Re: Screen output problem

Post by Paulwilco » Sat Mar 30, 2024 8:04 pm

Great idea Lardo, didn't think of that!

I'll give it a try. Would be nice to know what's causing the composite output issue though.
Top
Post Reply

Return to “Hardware”