In anticipation of the receipt of an 80 column card for my TC01 (and in the hope it works with my flaky Pipe connection) I am hoping to do some C coding in my tatty.
Can anyone recommend a good C compiler for the tatty? Ideally I need to be able to download a disc image and instructions!
I have seen some public domain images with C (http://www.tatungeinstein.co.uk/front/publicdomain.htm) but no manuals and I have found reference to, for example, Aztec C with manuals (http://www.aztecmuseum.ca/docs/index.htm) but no obvious download...
C for the TC01
-
Lardo Boffin
- Posts: 296
- Joined: Thu Oct 24, 2019 11:47 am
C for the TC01
TC-01 + einSDein + TM-01 + TK-02 + gotek
-
MikeDHalliday
- Posts: 220
- Joined: Fri Oct 25, 2019 9:52 am
- Location: Crewe
- Contact:
Re: C for the TC01
The only Aztec C I have seen for CP/M machines is attached.
No idea if it works or not on Albert as I havent tried it, but looking at the archive, it has all the .COM files that you should need.
It might even be too big to fit on a 3" disc?
Regards
Mike.
No idea if it works or not on Albert as I havent tried it, but looking at the archive, it has all the .COM files that you should need.
It might even be too big to fit on a 3" disc?
Regards
Mike.
- Attachments
-
- Aztec-C106d.zip
- (208.32 KiB) Downloaded 258 times
Ex owner of a real TC01 with Gotek boot drive and second drive, Joysticks, DAC hardware (Built but untested) and loads of manuals, books and mags. Living the emulation life now!
-
Lardo Boffin
- Posts: 296
- Joined: Thu Oct 24, 2019 11:47 am