einSDein now available

Buy, Sell, Trade & Wanted Posts can be found in here.
User avatar
sirmorris
Posts: 97
Joined: Thu Oct 24, 2019 1:12 pm
Location: Oxford

einSDein now available

Post by sirmorris » Fri Nov 01, 2019 3:28 pm

November 2019

I have 2 boards ready to go. £45 each including first class shipping to UK address.

The manual is online here, in case you're wondering what this is all about. For the tl;dr generation - it's basically instant CHUCKIE EGG. And more, obviously.

* 2 virtual disk drives allowing unprotected .dsk images to be mounted and used as if they were physical disks
* DOS integration, run programs direct from SD card

TC-01 only. The '256 does not have any usable external expansion.

Contact me via PM or email, you can find address in my user info.
-
IMG_20191101_151434.jpg
IMG_20191101_151434.jpg (1.32 MiB) Viewed 9761 times
Last edited by sirmorris on Fri Nov 01, 2019 3:34 pm, edited 2 times in total.

vanpeebles
Posts: 263
Joined: Wed Oct 23, 2019 8:43 pm

Re: einSDein now available

Post by vanpeebles » Fri Nov 01, 2019 3:31 pm

Me please!! I don’t suppose you could make some scart leads too please?

User avatar
sirmorris
Posts: 97
Joined: Thu Oct 24, 2019 1:12 pm
Location: Oxford

Re: einSDein now available

Post by sirmorris » Sun Nov 03, 2019 9:21 pm

Both boards are now sold but I have PCBs and can make new einSDein to order.

C

vanpeebles
Posts: 263
Joined: Wed Oct 23, 2019 8:43 pm

Re: einSDein now available

Post by vanpeebles » Tue Nov 05, 2019 10:15 am

Would you be able to build 256 power/scart cables? RGB scart and a female molex for power? Retroshack no longer supplies them, and there is a spanish site that sells one, but it's just composite audio/video.

jltursan
Posts: 41
Joined: Fri Oct 25, 2019 6:09 pm

Re: einSDein now available

Post by jltursan » Thu Nov 07, 2019 6:38 pm

One for me when available, please!

I suppose the VAMP has not the needed signals,... an absolutely pity as I'm really interested in getting some life from my 256. Can't remember the exact differences between the TC-01 interface and the VAMP; but can an internally plugged device get all the needed signals from a socket (the Z80 for example)?

User avatar
sirmorris
Posts: 97
Joined: Thu Oct 24, 2019 1:12 pm
Location: Oxford

Re: einSDein now available

Post by sirmorris » Thu Nov 07, 2019 10:20 pm

VAMP (Video And Mouse Port) exposes signals from the VDP. Nothing usable there. I've considered many approaches to get einSDein working with the 256 but I'm not looking any more. There's a number of issues;

1> no z80 signals available externally.
2> no utility/extension ROM support.
3> no disassembly of '256 dos.

Just one of these alone would present significant problems. All three are a complete blocker :cry:

vanpeebles
Posts: 263
Joined: Wed Oct 23, 2019 8:43 pm

Re: einSDein now available

Post by vanpeebles » Fri Nov 08, 2019 10:26 am

I've been reading through old magazines to gleam information, and saw that there was a 256 version of speculator that plugged into the z80 port.

jltursan
Posts: 41
Joined: Fri Oct 25, 2019 6:09 pm

Re: einSDein now available

Post by jltursan » Mon Nov 18, 2019 6:24 pm

sirmorris wrote:
Sun Nov 03, 2019 9:21 pm
Both boards are now sold but I have PCBs and can make new einSDein to order.

C
Any update on this? ;)

User avatar
sirmorris
Posts: 97
Joined: Thu Oct 24, 2019 1:12 pm
Location: Oxford

Re: einSDein now available

Post by sirmorris » Wed Nov 20, 2019 2:56 pm

Check PMs

jltursan
Posts: 41
Joined: Fri Oct 25, 2019 6:09 pm

Re: einSDein now available

Post by jltursan » Wed Nov 20, 2019 6:29 pm

Yep, done!

Post Reply